1812/2012 Ro Membrane Housing Kit For 24-150 Gpd Reverse Osmosis Water Purifier
USD $7.95
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
1812/2012 RO Membrane Housing Kit for 24-150 GPD Reverse Osmosis Water Purifier Standard Size:
Membrane Solutions 1812/2012 Reverse osmosis housing, with a universal size, is compatible with most of the standard-sized residential RO membranes, including 24 GPD /36 GPD /50 GPD /75 GPD /100 GPD /150GPD.
Fits for APEC Water Systems, Express Water, GE, Home Master, iSpring, SimPure, etc.
Durable Construction:
Manufactured with FRP (Fiber Reinforced Polypropylene), thicker constructed, the membrane housing provides better pressure resistance, excellent anti-explosion performance, and heat insulation property. It resists acids, alcohol, ammonia, oils, plating solutions, and other corrosive chemicals.
Efficient Leakage Protection:
Designed and manufactured with a thicken unibody and a dual o-ring sealing leakage protection to ensure drinking fresh, compression resistance, and explosion-proof strength.
Wide Application:
Use a reverse osmosis filtration set to your RO water system at the home, office to enjoy fresh water. You can also take it as part of your DIY water filtration system for drinking or getting concentrated maple sap.
How to Change RO Housing and Membrane?
Turn off the feed water supply line valve to the RO system and the valve on the water tank.
Open the RO faucet and allow the pressure in the system to bleed off.
Remove the blue clip, push down the collect and push out the tubing to disconnect from the membrane housing.
Use the wrench to remove the membrane housing cap.
Use pliers to remove the used membrane, discard and insert the new membrane. The end with 2 little washers goes in first, push until you feel it seats securely into the membrane housing.
Replace and tighten the membrane housing cap. Reconnect the removed tubing and put back the blue clip.
Note: If you can't put back the housing cap easily, twist the RO membrane gently to get it correctly seat to the fresh water outlet.
Membrane Solutions 1812/2012 Reverse osmosis housing, with a universal size, is compatible with most of the standard-sized residential RO membranes, including 24 GPD /36 GPD /50 GPD /75 GPD /100 GPD /150GPD.
Fits for APEC Water Systems, Express Water, GE, Home Master, iSpring, SimPure, etc.
Durable Construction:
Manufactured with FRP (Fiber Reinforced Polypropylene), thicker constructed, the membrane housing provides better pressure resistance, excellent anti-explosion performance, and heat insulation property. It resists acids, alcohol, ammonia, oils, plating solutions, and other corrosive chemicals.
Efficient Leakage Protection:
Designed and manufactured with a thicken unibody and a dual o-ring sealing leakage protection to ensure drinking fresh, compression resistance, and explosion-proof strength.
Wide Application:
Use a reverse osmosis filtration set to your RO water system at the home, office to enjoy fresh water. You can also take it as part of your DIY water filtration system for drinking or getting concentrated maple sap.
How to Change RO Housing and Membrane?
Turn off the feed water supply line valve to the RO system and the valve on the water tank.
Open the RO faucet and allow the pressure in the system to bleed off.
Remove the blue clip, push down the collect and push out the tubing to disconnect from the membrane housing.
Use the wrench to remove the membrane housing cap.
Use pliers to remove the used membrane, discard and insert the new membrane. The end with 2 little washers goes in first, push until you feel it seats securely into the membrane housing.
Replace and tighten the membrane housing cap. Reconnect the removed tubing and put back the blue clip.
Note: If you can't put back the housing cap easily, twist the RO membrane gently to get it correctly seat to the fresh water outlet.
Price type
IN STOCK
OUT STOCK
.
